Browsing Posts tagged wire strippers

5001 Wire Stripper

The Major 5001 wire stripper is designed to be compact and lightweight, adding to the portability and ease of use.  The 5001 is adjustable from 14-30AWG, so the blades do not need to be changed for every size of wire. The adjusting knobs also allow the wire to be completely or partially stripped. It is very simple to use, having plug and play capabilities and requiring just a few basic steps to operate. First, set the wire size and strip length using the adjustment knobs located near the top of the machine. Then select whether the wire is to be fully or partially stripped. Next insert the wire into the machine, which will start stripping when the wire touches the stop inside. A drawer on the side collects any insulation scraps and can be emptied when it gets full.

Major Electronix has a number of separate 5001 replacement parts available, including sets of cutting blades, as well as 5002 & 5003 stripping machines. For more information, contact Major Electronix at 800-966-2345 or sales@majorelectronix.com.

Click for more information on the Major 5001 Wire Stripper

Major Electronix is now offering separate component parts through their website for their 5001 wire stripping machines. The 5001 wire stripper is all electric and can accommodate 30-14 AWG single conductor wire. The 5001 makes it possible to strip different sizes of wire without having to change the cutting blades while featuring a lightweight, space-saving design. Replacement sets of 5001 cutting blades are now available through the Major Electronix website, as well as blades for their 5002 machines. Other individual parts include replacement feet, circuit boards, gauge indicators and adjustment knobs, and the 5001 motor & clutch assembly.

For more information on the Major Electronix line of wire strippers or their replacement parts, contact Major Electronix at 800-966-2345 or sales@majorelectronix.com.

Click for more information on Major Wire Stripping Machine Parts

 Major’s all electric bench top wire strippers are lite weight with a plug and play design.  Easy to use controls allow a operator to be up and running with in minutes after instruction.  These machines are designed to strip the ends of wires for connector or crimp terminal assembly


Major 5001 Wire Stripper

Click for more Details

Model: 5001 Wire Stripper
Wire Range: 30 – 12 awg
Specialty: Teflon Jacket


Major 5002 Wire Stripper


Click for more Details

Model: 5002 Wire Stripper
Wire Range: 28 – 10 awg
Specialty: Ease of Use


Major 5002-S Wire Stripper

Click for more Details

Model: 5002-S Wire Stripper
Wire Range: 28 – 14 awg
Specialty: Short Infeed


Major 5003 Wire Stripper

Click for more Details

Model: 5003 Wire Stripper
Wire Range: 14 – 6 awg
Specialty: Ease of Use